Change history of Common Module
[Auto Update System Upgraded]
- Auto update system has been upgraded to improve the response performance and usability.
To update the auto update system, install this update. It will be updated at the next startup.
- :Version V2.* → CX-One Version 2 Auto-update (August 2009)
Improved functions
- Fixed the comments that are displayed in the I/O table of CJ(S) 1W-CRM21.
- :Version V2.* → CX-One Version 2 Auto-update (June 2009)
New functions
[CPS]
- Added the following files
CPS_CJ1W-AD042_Ver1_0.xml
CPS_CJ1W-DA042V_Ver1_0.xml
CPS_CJ1W-SPU01_Ver2_1.xml
CPS_CS1W-SPU01_Ver2_1.xml
CPS_CS1W-SPU02_Ver2_1.xml
- :Version V2.* → CX-One Version 2 Auto-update (April 2009)
New functions
[Support of New Types]
- Ethernet units for CS/CJ-series PLCs are suppoerted.
CS1W-ETN21 Unit Ver.1.5 and CJ1W-ETN21 unit Ver.1.5 are supported.
[CPS]
- Added the following files:
CPS_CJ1W-ETN21_Ver1_5_mode21.xml
CPS_CJ1W-ETN21_Ver1_5_mode11.xml
CPS_CS1W-ETN21_Ver1_5_mode21.xml
CPS_CS1W-ETN21_Ver1_5_mode11.xml
Improved functions
- Solved the following problems:
When registering SYSMAC BUS/2 in I/O table, channel allocations may have failed.
[CX-One Upgrade Utility ]
- Solved the following problem: Sometimes it took several days until updates become actually available after announcement.
- :Version V2.* → CX-One Version 2 Auto-update (February 2009) (Including CPS)
New functions
[CPS]
- Added the following files
CPS_CP1H-X40DR-A_Ver1_2.xml
CPS_CP1H-X40DT1-D_Ver1_2.xml
CPS_CP1H-X40DT-D_Ver1_2.xml
CPS_CP1H-XA40DR-A_Ver1_2.xml
CPS_CP1H-XA40DT1-D_Ver1_2.xml
CPS_CP1H-XA40DT-D_Ver1_2.xml
CPS_CP1H-Y20DT-D_Ver1_2.xml
- :Version V2.* → CX-One Version 2 Auto-update (December 2008) (Including CPS)
New functions
[Auto Update System Upgraded]
- Auto update system has been upgraded to improve the response performance and usability.
[CPS]
- Added the following files
CPS_CJ1W-ID212_Ver0_0.xml
CPS_CJ1W-ID233_Ver0_0.xml
CPS_CJ1W-OD213_Ver0_0.xml
CPS_CJ1W-OD234_Ver0_0.xml
CPS_CJ1W-LCB01_Ver3_6.xml
CPS_CJ1W-LCB03_Ver3_6.xml
CPS_CS1W-LCB01_Ver3_6.xml
CPS_CS1W-LCB05_Ver3_6.xml
- :Version V2.* → CX-One Version 2 Auto-update (October 2008) (Including CPS)
New functions
[CPS]
- Added the following files
CPS_NS8-TV10-V2.xml
CPS_NS8-TV11-V2.xml
Improved functions
Solved the following problems
- The Controller Link was not displayed in the unit selection list of CX-Net data link setting.
- :Version V2.* → CX-One Version 2 Auto-update (September 2008) (Including CX-Server, CPS)
New functions
- Supproted for CS1W-NC271/CS1W-NC471/CJ1W-NC271/CJ1W-NC471.
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008) (Including CPS)
New functions
[CPS]
- Added the following files
CPS_NSJ5-SQ10_Ver8_0.xml
CPS_NSJ5-SQ11_Ver8_0.xml
CPS_NSJ5-TQ10_Ver8_0.xml
CPS_NSJ5-TQ11_Ver8_0.xml
CPS_NSJ5-SQ10-G5D_Ver3_0.xml
CPS_NSJ5-SQ11-G5D_Ver3_0.xml
CPS_NSJ5-TQ10-G5D_Ver3_0.xml
CPS_NSJ5-TQ11-G5D_Ver3_0.xml
CPS_NSJ5-SQ10-M3D_Ver3_0.xml
CPS_NSJ5-SQ11-M3D_Ver3_0.xml
CPS_NSJ5-TQ10-M3D_Ver3_0.xml
CPS_NSJ5-TQ11-M3D_Ver3_0.xml
CPS_NSH5-SQ10-V2.xml
CPS_NS5-MQ10-V2.xml
CPS_NS5-MQ11-V2.xml
CPS_NS5-SQ10-V2.xml
CPS_NS5-SQ11-V2.xml
CPS_NS5-TQ10-V2.xml
CPS_NS5-TQ11-V2.xml
CPS_CJ1H-CPU64H-R_Ver4_2.xml
CPS_CJ1H-CPU65H-R_Ver4_2.xml
CPS_CJ1H-CPU66H-R_Ver4_2.xml
CPS_CJ1H-CPU67H-R_Ver4_2.xml
Improved functions
- Solved the problem that the changed parameters of routing table for CLK Unit(Level#1) on C-series PLC are not transferred.
- Solved the problem of the possibility that illegal data is written in DM area of C200HE(-Z), C200HG(-Z), C200HS or C200HX(-Z) if the value is continuously changed by using the PLC memory window in CX-Programmer.
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008) (Including CPS)
New functions
[CPS]
- Added the following files
CPS_CP1L-L10DR-A_Ver1_0.xml
CPS_CP1L-L10DR-D_Ver1_0.xml
CPS_CP1L-L10DT1-D_Ver1_0.xml
CPS_CP1L-L10DT-A_Ver1_0.xml
CPS_CP1L-L10DT-D_Ver1_0.xml
CPS_CP1L-M60DR-A_Ver1_0.xml
CPS_CP1L-M60DR-D_Ver1_0.xml
CPS_CP1L-M60DT1-D_Ver1_0.xml
CPS_CP1L-M60DT-A_Ver1_0.xml
CPS_CP1L-M60DT-D_Ver1_0.xml
CPS_CP1L-L14DT-A_Ver1_0.xml
CPS_CP1L-L20DT-A_Ver1_0.xml
CPS_CP1L-M30DT-A_Ver1_0.xml
CPS_CP1L-M40DT-A_Ver1_0.xml
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (February 2008) (Including CPS)
New functions
Support for CompoNet Network
- The CompoNet network is supported.
[CPS]
- Added the following files
CPS_CJ1W-PH41U_Ver1.0.xml
CPS_CompoNet.xml
Improved functions
- When verification of routing table was executed after transferring the table to C/CV series PLC, the comparison for the table was failed. This problem was solved.
[CPS]
- Corrected the following files
Cps.dtd
CPS_CJ1W-CRM21(MODE0)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE1)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE2)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE3)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE8)_Ver1_3.xml
CPS_CJ1W-CRM21_Ver1_1.xml
CPS_CJ1W-CRM21_Ver1_2.xml
CPS_CS1W-CRM21(MODE0)_Ver1_3.xml
CPS_CS1W-CRM21(MODE1)_Ver1_3.xml
CPS_CS1W-CRM21(MODE2)_Ver1_3.xml
CPS_CS1W-CRM21(MODE3)_Ver1_3.xml
CPS_CS1W-CRM21(MODE8)_Ver1_3.xml
CPS_CS1W-CRM21_Ver1_1.xml
CPS_CS1W-CRM21_Ver1_2.xml
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007) (Including CPS)
New functions
- Added the following files
CPS_CJ1H-CPU64H-R_Ver4_1.xml
CPS_CJ1H-CPU65H-R_Ver4_1.xml
CPS_CJ1H-CPU66H-R_Ver4_1.xml
CPS_CJ1H-CPU67H-R_Ver4_1.xml
CPS_CJ1W-AD04U_Ver0_0.xml
CPS_CJ1W-LCB01_Ver3_5.xml
CPS_CJ1W-LCB03_Ver3_5.xml
CPS_CJ1W-NCF71_Ver2_1.xml
CPS_CJ1W-V680C11_Ver0_0.xml
CPS_CJ1W-V680C12_Ver0_0.xml
CPS_CS1W-CLK13_Ver1_0.xml
CPS_CS1W-LCB01_Ver3_5.xml
CPS_CS1W-LCB05_Ver3_5.xml
CPS_CS1W-NCF71_Ver2_1.xml
CPS_CS1W-SRM21(2CH)_Ver0_0.xml
CPS_CS1W-SRM21_Ver0_0.xml
CPS_CS1W-V680C11_Ver0_0.xml
CPS_CS1W-V680C12_Ver0_0.xml
CPS_CS1W-MC421(-V1)_Ver1_1.xml
CPS_CS1W-MC221(-V1)_Ver1_1.xml
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (October 2007) (Including CPS)
Improved functions
Corrected the following files
- CPS_CJ1W-PRT21_Ver0_0.xml
- :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007) (Including CPS)
New functions
- Added the following files
CPS_CJ1W-CLK23_Ver2_0.xml
CPS_CJ1W-SPU01_Ver2_0.xml
CPS_CS1D-CPU65H_Ver2_0.xml
CPS_CS1D-CPU67H_Ver2_0.xml
CPS_CS1W-CLK13_Ver2_0.xml
CPS_CS1W-CLK23_Ver2_0.xml
CPS_CS1W-CLK53_Ver2_0.xml
CPS_CS1W-SPU01_Ver2_0.xml
CPS_CS1W-SPU02_Ver2_0.xml
CPS_TJ1-MC04_Ver0_0.xml (English only)
CPS_CJ1W-ADG41_Ver1_0.xml (Japanese only)
- Updated the following files
CPS_CJ1W-CRM21(MODE0)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE1)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE2)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE3)_Ver1_3.xml
CPS_CJ1W-CRM21(MODE8)_Ver1_3.xml
CPS_CJ1W-OD232_Ver0_0.xml
CPS_CJ1W-SPU01_Ver1_3.xml
CPS_CS1W-CRM21(MODE0)_Ver1_3.xml
CPS_CS1W-CRM21(MODE1)_Ver1_3.xml
CPS_CS1W-CRM21(MODE2)_Ver1_3.xml
CPS_CS1W-CRM21(MODE3)_Ver1_3.xml
CPS_CS1W-CRM21(MODE8)_Ver1_3.xml
CPS_CS1W-SPU01_Ver0_0.xml
CPS_CS1W-SPU01_Ver1_0.xml
CPS_CS1W-SPU01_Ver1_3.xml
CPS_CS1W-SPU02_Ver0_0.xml
CPS_CS1W-SPU02_Ver1_0.xml
CPS_CS1W-SPU02_Ver1_3.xml
- Newly supports the parameter setting of SPU Unit in I/O Table.
- Newly supports Windows Vista.
Improved functions
- Improved the PLC memory function so that the saved data before monitoring can be automatically displayed after monitoring.
- Solved the problem in which "Others" was displayed for device type when CPS files were saved and then opened, if PLC device type was set to "CPU-R" in CLK Datalink Table.
- :Version 2.04 → CX-One Version 2.0 Auto-update (June 2007) (CPS含む)
New functions
- Added the following CPS files
CPS_CJ1W-MCH71_Ver3_1.xml
CPS_CS1W-MCH71_Ver3_1.xml
- :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007) (Including CPS)
New functions
Support of New Types
- CJ1-H-R and CP1L are supported.
CJ1H-CPU**H-R
CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, and CP1L-M40D*-*
- CS1W-CRM21 Unit Ver.1.3 and CJ1W-CRM21 Unit Ver.1.3 are supported.
- Added the following files
CPS_CS1W-MCH71_Ver3_0.xml
CPS_CS1W-PDC55_Ver1_1.xml
CPS_CS1W-PTS55_Ver1_1.xml
- Corrected the following files
CPS_C200H-AD003_Ver0_0_Adjustment.xml
CPS_C200H-CT001-V1_Ver0_0_Gate_Latch_Sampling.xml
CPS_C200H-CT001-V1_Ver0_0_Linear_Circular.xml
CPS_C200H-CT001-V1_Ver0_0_Preset.xml
CPS_C200H-CT002_Ver0_0_Gate_Latch_Sampling.xml
CPS_C200H-CT002_Ver0_0_Linear_Circular.xml
CPS_C200H-CT002_Ver0_0_Preset.xml
CPS_C200H-CT021_Ver0_0_Gate_CumulativeGate_Sampling.xml
CPS_C200H-CT021_Ver0_0_Linear_Circular.xml
CPS_C200H-CT021_Ver0_0_Preset.xml
CPS_C200H-CT021_Ver0_0_SimpleCounter.xml
CPS_C200H-DA003_Ver0_0_Adjustment.xml
CPS_C200H-DA004_Ver0_0_Adjustment.xml
CPS_C200H-MAD01_Ver0_0_Adjustment.xml
CPS_CJ1W-AD081_Ver0_0.xml
CPS_CJ1W-DA021_Ver0_0.xml
CPS_CJ1W-DA041_Ver0_0.xml
CPS_CJ1W-DA08C_Ver0_0.xml
CPS_CJ1W-DA08V_Ver0_0.xml
CPS_CJ1W-MAD42_Ver0_0.xml
CPS_CJ1W-MCH71_Ver3_0.xml
CPS_CJ1W-PDC15_Ver0_0.xml
CPS_CJ1W-PTS15_Ver0_0.xml
CPS_CJ1W-PTS16_Ver0_0.xml
CPS_CJ1W-TC001_Ver0_0.xml
CPS_CJ1W-TC002_Ver0_0.xml
CPS_CJ1W-TC003_Ver0_0.xml
CPS_CJ1W-TC004_Ver0_0.xml
CPS_CJ1W-TC101_Ver0_0.xml
CPS_CJ1W-TC102_Ver0_0.xml
CPS_CJ1W-TC103_Ver0_0.xml
CPS_CJ1W-TC104_Ver0_0.xml
CPS_CJ1W-TS561(3ch)_Ver0_0.xml (English version only)
CPS_CJ1W-TS561(4ch)_Ver0_0.xml (English version only)
CPS_CJ1W-TS561(6ch)_Ver0_0.xml (English version only)
CPS_CJ1W-TS562(3ch)_Ver0_0.xml (English version only)
CPS_CJ1W-TS562(4ch)_Ver0_0.xml (English version only)
CPS_CJ1W-TS562(6ch)_Ver0_0.xml (English version only)
CPS_CS1W-AD041_Ver0_0.xml
CPS_CS1W-AD081_Ver0_0.xml
CPS_CS1W-AD161_Ver0_0.xml
CPS_CS1W-DA041_Ver0_0.xml
CPS_CS1W-DA08C_Ver0_0.xml
CPS_CS1W-DA08V_Ver0_0.xml
CPS_CS1W-MAD44_Ver0_0.xml
CPS_CS1W-PDC55_Ver0_0.xml
CPS_CS1W-V600C11_Ver0_0.xml
CPS_CS1W-V600C12_Ver0_0.xml
- :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007) (CPS Library Only)
New functions
- Added the following files
CPS_EJ1G-HFU_Ver0_0.xml
CPS_EJ1G-TC2_Ver0_0.xml
CPS_EJ1G-TC4_Ver0_0.xml
CPS_CS1W-CRM21_Ver1_1.xml
CPS_CS1W-CRM21_Ver1_2.xml
CPS_CJ1W-CRM21_Ver1_1.xml
CPS_CJ1W-CRM21_Ver1_2.xml
- :Version 2.03 → CX-One Version 2.0 Auto-update (December 2006) (CPS Library Only)
New functions
- Corrected the errors in writing in the following files:
CS1W-V600C11
CS1W-V600C12
- Added the following files
CPS_CJ_Dummy_016.xml
CPS_CJ_Dummy_032.xml
CPS_CJ_Dummy_048.xml
CPS_CJ_Dummy_064.xml
CPS_CJ_Dummy_096.xml
CPS_CJ_Dummy_128.xml
- :Version 2.02 → CX-One Version 2.03 (November 2006) (CPS Library Only)
New functions
- Support of New PLC Types
- Support of CS1D Unit Ver. 1.3.
New Type (Ver. 1.3) --- Type CS1D-CPU**H are supported.
- Support the expansion of error log up to 96 records in CS1W-DRM21-V1 and CJ1W-DRM21.
Change history of CX-Server
Ver.3.22 : Version V2.* → CX-One Version 2 Auto-update (June 2009)
Improved functions
- The Controller Link was not displayed in the unit selection list of CX-Net data link setting.
V3.21 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
Improved functions
- Solved the problem that CX-Server shut down illegally when the PLC memory window in CX-Programmer was opened during the monitoring.
V3.2 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
Improved functions
- CP1L-L10 and CP1L-M60 are supported.
CX-Server CompoNet Driver :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (February 2008)
New functions
Support for CompoNet Network
- CX-Server device driver for CompoNet
Ver.3.12 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (October 2007)
Improved functions
- Solved the problem in which driver management tool could not be selected from Start menu on Windows Vista.
Ver.3.11 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
Improved functions
- Solved the problem in which the application might be unexpectedly terminated when changed to offline.
- Solved the problem in which CX-Server hanged if operated with utility attached to nVidia graphic card.
Ver.3.04 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
Support of New Types
- CJ1-H-R and CP1L are supported.
CJ1H-CPU**H-R
CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, and CP1L-M40D*-*
Ver.3.03 :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007)
Improved functions
- Solved the problem in which modem connection to the CV-series unit was impossible via SYSWAY.
Ver.3.02 :Version 2.02 → CX-One Version 2.03 (November 2006)
New functions
Support of New PLC Types
- Support of CS1D Unit Ver. 1.3 and FQM1 Unit Ver. 3.2.
New Type (Ver. 1.3) --- Type CS1D-CPU**H
New Type (Ver. 3.2) --- Type FQM1-CM***, Type FQM1-MMA**, and Type FQM1-MMP**
Improved functions
- Improved the connectivity for reconnection of FINS/TCP.
- Solved the problem in which the UM/EM sizes are not correctly recognized when auto online function to CJ1H-CPU67H is executed in CX-Programmer.
CX-Server&Drivers Ver.3.0 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- CS/CJ-series CPU Units with Unit Version 4.0 are supported.
- CP1HY CPU Units are supported.
CX-Programmer Change history of
Ver.7.31 :Version V2.* → CX-One Version 2 Auto-update (April 2009)
Improved functions
- Solved the following problems:
When you repeated print previews of SFC chart, the memory may have run out.
FB instance may have changed into improper data in such a condition that a symbol named 'FBCALL' is registered in a symbol table.
Ver.7.3.0.10 :Version V2.* → CX-One Version 2 Auto-update (February 2009)
Improved functions
- Solved the problem with auto online connection between CV-Series PLC.
Ver.7.30 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
Improved functions
- Solved the problem that the result of compilation become internal error when there are some FB.
- Solved the problem that PLC might operate illegally when there was a transition condition of the SFC program and the SFCPR instruction and the SFCON instruction in another program.
- Solved the problem that CX-Programmer shut down illegally when there are some action ladder of SFC program in compiling.
Ver.7.30 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
New functions
Support of New Types
- CP1L-L10 and CP1L-M60 are supported.
CP1L-L10D*-*
CP1L-M60D*-*
Ver.7.23 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (February 2008)
Improved functions
- Solved the problem with displaying the ST task size of the task property.
- Solved the problem with comparing program which included Task read protect.
Ver.7.22 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
Improved functions
- File opening/closing time became quick, when there are some FB.
Ver.7.21 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
Improved functions
- The improvement which matches the operativity of old version
If program was downloaded to PLC by Ver. 6.11 or earlier CX-Programmer, when verification was executed by Ver. 7.20, the comparison for function blocks was failed. This problem was solved.
- In the bit address change on ladder view, error message was not displayed even if a symbol with the same name existed. This problem was solved.
- Solved the problem in which symbols for the operands using more than one word were not correctly displayed in the cross-reference report.
- Solved the problem in which Layout Printing did not correctly function on Windows Vista, which occurred in CX-Programmer upgraded from Ver. 2.0x to Ver. 2.10/2.11.
Ver.7.20 :Version 2.0*/2.10/2.11 → CX-One Version 2 Auto-update(September 2007)
Improved functions
The improvement which matches the operativity of old version
- Solved the problem in which same-address words could not be detected when any bit other than Bit 0 was specified in Cross-Reference.
- Solved the problem in which data type could not be changed together with symbol name when Edit button is selected on the Edit Instruction dialog.
- Solved the problem in which rung error occurred when a file including a specific symbol name (that includes GD/GW) was loaded.
Ver.7.20 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
Enhancement of IEC61131-3 compliant languages
- Newly supports ST language as a language of program (allocated to tasks).
- Newly supports SFC language as a language of program (allocated to tasks).
- Newly supports the symbols for specifying array on ladder/ST/SFC programs.
- It has become possible to verify function block definitions.
- It has become possible to verify ST programs and the action programs/transition programs/subcharts in SFC.
Enhancement of Symbol Table.
- Enhanced the coordination with CX-Designer for symbol table data.
- Newly supports String type as a symbol data type in ladder programs and ST programs.
Enhancement of auto online connecting function.
- Added the automatic search function of PC serial ports.
Improved functions
Enhancement of support functions for SYSMAC C500/C120/C**P
- It has become possible to convert the DM/HR Area data to PLC Memory when uploading the programs in SYSMAC C500/C120/C**P and converted to the programs for CS/CJ/CP-series PLC or CVM1/CV-series PLC.
- It has become possible to convert the backed up programs and I/O memory (DM/HR) files (.c5b) to CX-P project for CS/CJ/CP-series PLC or CVM1/CV-series PLC.
- It has become possible to save the programs uploaded from SYSMAC C500/C120/C**P in the mnemonic text format. By pasting this data as a text on the statement list of CX-Programmer and displaying/printing in the ladder format, it is possible to check the programs before conversion for CS/CJ/CP-series PLC or CVM1/CV-serives PLC on CX-Programmer.
Others
- For SYSMAC CS1D Duplex CPU System (CS1D-H), it has become possible to display the Active/Standby status of CPU Unit on the project tree.
CX-Programmer Common :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Added the CX-Programmer library.
Ver.7.11 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
New functions
Support of New Types
- CJ1-H-R and CP1L are supported.
CJ1H-CPU**H-R
CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, and CP1L-M40D*-*
Ver.7.03 :Version 2.02 → CX-One Version 2.03 (November 2006)
New functions
Support of New PLC Types
- Support of CS1D Unit Ver. 1.3 and FQM1 Unit Ver. 3.2.
New Type (Ver. 1.3)--- Type CS1D-CPU**H
New Type (Ver. 3.2) ---Type FQM1-CM***, Type FQM1-MMA**, and Type FQM1-MMP**
Improved functions
- By modifying CX-Server, Solved the problem in which the UM/EM sizes of CJ1H-CPU66H are displayed on the Project window in the case of auto online to CJ1H-CPU67H.
Ver.7.02 :Version 2.01 → CX-One Version 2.02 (October 2006)
Improved functions
- Solved the problem in which the FB instances with the same name are doubly registered in the symbol table when FB program is uploaded.
Ver.7.01 :Version 2.01 → CX-One Version 2.0 Auto-update (September 2006)
Improved functions
- Solved the problem in which a certain lot of C200H-IP007 Units could not communicate properly with the C500, C120, and C**P Backup Function
Ver.7.00 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New PLC Models
- CS/CJ-series CPU Units with unit version 4.0 are supported.
New models (unit version 4.0): Compatible with the CS1G-CPU**H,CS1H-CPU**H, CJ1G-CPU**H, CJ1H-CPU**H, and CJ1M-CPU**.
- The SYSMAC One NSJ-M3D Series is supported.
New models: Compatible with the NSJ5-TQ0*-M3D,NSJ5-SQ0*-M3D, and NSJ8-TV0*-M3D.
Improvements to Function Block Functions
- Supports conversion to ladder program FBs.
Function block definitions can be created easily from ladder programs.
- Supports input-output variables.
Input-output parameters can be specified in function blocks.
- Supports online function block editing.
Function block definitions can be changed in an operating PLC.
- Improvements to ST function blocks
- The STRING data type can be used. Text processing functions can be used to easily manipulate text strings and process display messages.
Supports Conversion of Earlier PLC’s Programs
- A C500, C120, or C**P PLC program can be uploaded and converted to a CS/CJ/CP -series PLC program or CVM1/CV-series PLC program.
- The program and I/O memory data stored in a C500, C120, or C**P PLC can be backed up, restored, and verified.
Improvements to the Data Trace and Time Chart Monitor Functions
- Two-word data can be specified and traced.
Improved functions
Editing I/O Comments
- Solved the problem that caused hidden comments to be lost if comments were changed in the ladder view when registering multiple I/O comments.
Checking the Program
- Solved the problem in which a program error was detected if FOR-NEXT instructions were used between MULTI-INTERLOCK instructions.
Cross Reference Reports
- Corrected the problem which took a long time to copy more than a few thousand data items at a time.
Monitoring
- Solved the problem that prevented connecting lines from connecting properly to a text string comparison instruction.
- Solved the problem that prevented the monitoring of LREAL variable data when connected to an FQM1 CPU Unit with unit version 3.0.
Transferring Programs
- Solved the problem that prevented the proper transfer of a program with a Customizable Counter Unit if the program contained a MOVL instruction.
Verifying Programs
- Solved the problem that caused verification errors with a nested PLC program when the nested program was read from the PLC and stored.
Data Trace
- Solved the problem which prevented the previous trace trigger setting from being read from the PLC.
Change history of SwitchBoxUtility
Ver.1.6.3.1 :Version V2.* → CX-One Version 2 Auto-update (August 2007)
New functions
[Support of New Types]
CJ1-H-R and CP1L are supported.
- CJ1H-CPU**H-R
- CP1L-L10D*-* , CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, CP1L-M40D*-*, and CP1L-M60D*-*
Ver.1.62 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New PLC Models
The SYSMAC One NSJ-M3D Series is supported.
- New models: Compatible with the NSJ5-TQ0*-M3D,NSJ5-SQ0*-M3D, and NSJ8-TV0*-M3D.
CP1H CPU Units are supported.
- New models: Compatible with the CP1H-XA****-*,CP1H-X****-*, and CP1H-Y****-*.
Change history of CX-Integrator
Ver.2.24 :Version V2.* → CX-One Version 2 Auto-update (April 2009)
New functions
- Support the DeviceNet sensor module: E3X-DRT21-S V3.
Ver.2.23 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
New functions
Support of New Types
- THERMAC EJ1N(Standard Control Models) Ver.1.2 are supported.
Supports the new version models: EJ1N-TC2*-QNHB, EJ1N-TC4*-QQ, EJ1N-TC2*-CNB
Ver.2.22 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
New functions
- EDS file for DeviceNet ID Slave, V680-HAM42-DRT is added.
- Supports the new models:GRT1-TS2T、GRT1-IA4-1、GRT1-IA4-2.
- SmartSlice DeviceNet Communication unit (GRT1-DRT) Ver.2.0 are supported.
(Newly supports Software Setting of I/O Allocations function.)
Ver.2.20 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (February 2008)
New functions
Support for CompoNet Network
- The CompoNet network is supported.
Improved functions
- Solved the problem in which the I/O size of E3X-DRT21-S are not correctly calculated.
Ver.2.12 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
New functions
Support of New Types
- THERMAC EJ1N(Standard Control Models) DeviceNet Communications Unit are supported.
New Models: Compatible with the EJ1N-HFUB-DRT.
- SmartSlice GRT1-series Temperature Input Unit (Platinum resistance thermometer;Pt1000)(GRT1-TS2PK) are supported.
Ver.2.11 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (October 2007)
New functions
- Remote I/O Terminals with Screw-less Clamps (transistor type) (Model: DRT2-*D16SL(H)-1)) was added.
Improved functions
- Solved the problem in which data link was cancelled if a node for which SYSMAC LINK data link table has an error was monitored on the data link status view.
Ver.2.10 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Addressed the increase in the datalink capacity in Controller Link (4,000 words/node).
- Enhanced the function for setting Routing Table via network.
- Addressed the expansion of relay network table in Routing Table (64 nodes max.).
Improved functions
- Improved the transfer function for DeviceNet network.
- Improved the transfer function for CompoWay/F network.
Ver.2.06 (2007/4/30)
New functions
Support of New Types
- CJ1-H-R and CP1L are supported.
CJ1H-CPU**H-R
CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, and CP1L-M40D*-* are newly supported.
Ver.2.04 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
New functions
Support of New Types
- New SmartSlice I/O units are supported.
GRT1-ID8(-1), GRT1-OD8(-1)
Ver.2.03 :Version 2.02 → CX-One Version 2.03 (November 2006)
New functions
- Support the expansion of error log up to 96 records in CS1W-DRM21-V1 and CJ1W-DRM21.
Improved functions
- Solved the problem in which the program abnormally terminated while displaying the English-version help file.
Ver.2.00 (No change to version number) :Version 2.01 → CX-One Version 2.0 Auto-update (September 2006)
New functions
Compatibility with New PLC Models
- SmartSlice GRT1-series Counter Units are supported.
New models: Compatible with the GRT1-CT1(-1).
Ver.2.00 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New PLC Models
- CS/CJ-series CPU Units with unit version 4.0 are supported.
New models (unit version 4.0): Compatible with the CS1G-CPU**H,CS1H-CPU**H, CJ1G-CPU**H,CJ1H-CPU**H, and CJ1M-CPU**.
- The SYSMAC One NSJ-M3D Series is supported.
New models: Compatible with the NSJ5-TQ0*-M3D, NSJ5-SQ0*-M3D, and NSJ8-TV0*-M3D.
Compatibility with New Models
- RoHS-compatible DRT2 (DeviceNet Slave) Units are supported.
Compatible with the DRT2-HD16CL, DRT2-HD16CL-1, DRT2-ID08CL,
DRT2-ID08CL-1, DRT2-OD08CL, DRT2-OD08CL-1, DRT2-ID08, DRT2-ID08-1,
DRT2-OD08, DRT2-OD08-1, DRT2-MD16, DRT2-MD16-1, DRT2-ID16ML,
DRT2-ID16ML-1, DRT2-OD16ML, DRT2-OD16ML-1, DRT2-MD16CL,
DRT2-MD16CL-1, DRT2-WD16CL, DRT2-WD16CL-1, DRT2-ID04CL,
DRT2-ID04CL-1, DRT2-OD04CL, and DRT2-OD04CL-1.
Network View
- The relationship between network connections can be displayed in an easy-to-understand format with the System Overview display and PLC Gateway display.
- The display can be switched between networks with just one click.
Uploading from Network
- When uploading from the network, any network name can be input.
- When uploading from the network, it is possible to upload only the different information from a node in the network.
Registering Components
- Registration operations have been improved by adding a wizard that can be used to register components and networks.
Other Upgrades
- Network and node information can be checked together in the Property Window.
- When downloading a CLK data link, the data link mode (manual/auto) setting can be checked.
- Multiple CPS files can be installed simultaneously.
Improved functions
- Solved the problem with the echoback test, which counted a test as successful even if the response time exceeded the monitoring time.
- Solved the problem which prevented the upload of an Ethernet (FINS/TCP) network’s configuration.
- Solved the problem which caused the CQM1H-CPU61 model number to be displayed incorrectly as a data link component.
- Solved the problem at data link startup which displayed a warning message indicating that there is no routing table.
- Made it possible to select CompoWay/F or NT Link as the network type when starting the CX-Integrator from the CX-Programmer’s I/O table.
- Improved the message displayed when data is write-protected and a routing table is downloaded.
Change history of CX-Protocol
Ver.1.71 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
New functions
Support of New Types
Ver.1.7 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New PLC Models
- The SYSMAC One NSJ-M3D Series is supported
New models: Compatible with the NSJ5-TQ0*-M3D, NSJ5-SQ0*-M3D,and NSJ8-TV0*-M3D.
- CP1H CPU Units are supported.
New models: Compatible with the CP1H-XA****-*, CP1H-X****-*, and CP1H-Y****-*.
- Supports Protocol Comparison
It is possible to compare protocols in each PMSU mounted in the connected PLC.
Change history of CX-Simulator
Ver.1.80 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
Improved functions
- Solved the problem that CX-Programmer does not connect CX-Simulator by compatibility with the residing application.
Ver.1.80 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
Support of New Types
- CP1L-L10 and CP1L-M60 are supported.
CP1L-L10D*-*
CP1L-M60D*-*
Ver.1.80 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Newly supports CX-Programmer Ver. 7.20.
Ver.1.80 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
New functions
- Support of New Types
CJ1-H-R and CP1L are supported.
CJ1H-CPU**H-R
CP1L-L14D*-*, CP1L-L20D*-*, CP1L-M30D*-*, and CP1L-M40D*-*
Ver.1.7 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New PLC Models
- CS/CJ-series CPU Units with unit version 4.0 are supported.
New models (unit version 4.0): Compatible with the CS1G-CPU**H, CS1H-CPU**H, CJ1G-CPU**H, CJ1H-CPU**H,and CJ1M-CPU**.
- The SYSMAC One NSJ-M3D Series is supported.
New models: Compatible with the NSJ5-TQ0*-M3D, NSJ5-SQ0*-M3D, and NSJ8-TV0*-M3D.
- CP1H CPU Units are supported.
New models: Compatible with the CP1H-XA****-*, CP1H-X****-*, and CP1H-Y****-*.
Supports the PLC-PT Integrated Simulation Function
- By selecting PLC-PT Integrated Simulation from the CX-Designer’s menu, the user program can be executed in a virtual PLC in order to debug associated PT screens.
Change history of CX-Position
Ver.2.40 :Version 2.04 → CX-One Version 2.0 Auto-update (June 2007)
New functions
- The connection of Position Control Unit is supported in FQM1 series.
- Windows Vista is supported.
Ver.2.3 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- A greater variety of operations can be performed from previous version. In addition to jogging, direct operation and origin searches can be executed.
Change history of CX-Motion-NCF
Ver.1.71 : Version V2.* → CX-One Version 2 Auto-update (October 2009)
New functions
- Supports the G5-series Servomotor/Servo Drives with built-in MECHATROLINK-II communications.
Ver.1.7 :Version V2.* → CX-One Version 2 Auto-update (September 2008)
New functions
- Supproted for CS1W-NC271/CS1W-NC471/CJ1W-NC271/CJ1W-NC471.
Ver.1.51 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (July 2008 additional)
New functions
[Support of New Types]
- Added support for G-series servo dirves with MECHATROLINK-Ⅱ communication I/F.
Ver.1.50 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Newly supports Windows Vista.
Ver.1.4 :Version 2.02 → CX-One Version 2.03 (November 2006)
New functions
Support of New Types
- Supports SMARTSTEP Junior Servo Driver.
- Supports CS1W/CJ1W-NCF71 Ver. 2.0.
Change history of CX-Motion-MCH
V2.10 :Version 2.04 → CX-One Version 2.0 Auto-update (June 2007)
New functions
Support of New Types
- MCH Units (Ver. 3.1) and SMARTSETP Junior are supported.
CS1W/CJ1W-MCH71 (Ver. 3.1) are newly supported.
R7D-ZN***-ML2 is newly supported.
- Windows Vista is supported.
V2.04 :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007)
Improved functions
- Solved the problem in which the data imported from Miel could not be downloaded to MCH due to compile error.
V2.03 :Version 2.03 → CX-One Version 2.0 Auto-update (December 2006)
Improved functions
- Solved the problem in which the data setting warning appeared in the servo driver when the servo parameters are downloaded or saved.
V2.02 :Version 2.02 → CX-One Version 2.03 (November 2006)
Improved functions
These two problems are solved.
- Solved the problem in which Servo data were always sent to MCH in the parameter transfer even if “Without Servo parameter” is selected.
- Solved the problem in which some zone watching area addresses could not be set fully.
V2.0 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- Data traces can be performed in the Motion Control Unit. Trace results are displayed in a graph.
- Operations such as jogging and origin search can be executed from the Support Software.
- The motion program can be executed and the program can be debugged from the Support Software.
Supports Unit Version Upgrade Features
- Supports the parameters added as part of the unit version upgrade.
Change history of CX-Motion
Ver.2.35 : Version V2.* → CX-One Version 2 Auto-update (December 2009)
Improved functions
- Solved the problem that the date in error log dialog is not displayed correctly in some regional settings.
V2.33 :Version V2.* → CX-One Version 2 Auto-update (August 2008)
Improved functions
- Solved the problem of special printing settings on certain printer models.
V2.32 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
Improved functions
- Improvement of All data transfer.
V2.31 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
New functions
- Added support to CS1W-MC421-V1/MC221-V1 Ver.1.1 and higher
V2.30 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Newly supports Windows Vista.
V2.27 :Version 2.04 → CX-One Version 2.0 Auto-update (April 2007)
Improved functions
- Improved the G code compiler so that the data can be transferred to MC unit even when the block numbers are arranged in random order.
V2.26 :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007)
Improved functions
- Improved the G code compiler so that the data can be downloaded to MC unit even when the line numbers are discontiguous.
V2.25 :Version 2.01 → CX-One Version 2.0 Auto-update (September 2006)
Improved functions
- Solved the problem which failed to import the MCSS file type data(.mcq, .mca, .mcp) .
- Solved the problem on the project tree window which could not move the icon of each data.
- Solved the problem which prevented the data selection uploading.
V2.24 (2006/8/31)
New functions
- When downloading data to a Motion Control Unit, the user can specify whether to save or overwrite the Unit’s ABS encoder values.
Change history of CX-Drive
Ver.1.91 : Version V2.* → CX-One Version 2 Auto-update (October 2009)
New functions
- Supports the G5-series Servomotor/Servo Drives with built-in MECHATROLINK-II communications.
Ver.1.90 : Version V2.* → CX-One Version 2 Auto-update (August 2009)
New functions
Improved functions
- Solved the problem that a part of parameters was unable to transfer to the JX/RX-series Inverters.
Ver.1.80 : Version V2.* → CX-One Version 2 Auto-update (June 2009)
New functions
Ver.1.70 :Version V2.* → CX-One Version 2 Auto-update (April 2009)
New functions
- Supporting 3G3RX Inverter model size addition.
Ver.1.70 :Version V2.* → CX-One Version 2 Auto-update (October 2008)
New functions
- New Inverter series support. 3G3JX/3G3MX/3G3RX
Ver.1.62 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (July 2008 additional)
New functions
[Support of New Types]
- Added support for new Servos in America and Asia, and CJ2 CPU, EtherNet/IP connections.
Improved functions
- Improved Servo Drive Data Trace Function.
Ver.1.61 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
New functions
Support of New Types
- Added support for new Servos in America and Asia.
- Added New functionality on Servo Drive Data Trace.
Ver.1.40 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Newly supports Windows Vista.
Ver.1.31 :Version 2.02 → CX-One Version 2.03 (November 2006)
New functions
- Support RV/RV-V1 version up.
Ver.1.3 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- Supports Inverter models with the version upgrade (RV-V1).
Change history of FP Auto-Builder for NS
Ver.3.11 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
Improved functions
- Solved the problem that the project built in the condition of settings that the first data log number is not set to default value contains a illegal data.
Ver.3.00 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
New functions
- Projects can be output in NS System version 6.6.
- Projects can be output in NS Runtime version 6.6.
- Face Plates can be built for the function block 'Segment Program 3(Block Model 158)'
Change history of FP Auto-Builder for NS (NSFP)
Ver.3.1 :Version V2.* → CX-One Version 2 Auto-update (August 2008)
New functions
- Projects can be output in NS System version 6.6.
- Projects can be output in NS Runtime version 6.6.
- Face Plates can be built for the function block 'Segment Program 3(Block Model 158)'
Ver.3.10 :V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
New functions
- Added to the compatible function blocks.
- Added a function that automatically inputs comments to unit and scale settings.
Ver.3.0 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- Added to the compatible function blocks.
- Added a function that automatically inputs comments to unit and scale settings.
Change history of CX-Designer
Ver.2.112 :Version V2.* → CX-One Version 2 Auto-update (August 2008)
Improved functions
- Solved the problem that the TIM area may not be properly displayed by numeral input object.
V2.111 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
Improved functions
- Solved the problem in which the result of Address Cross Reference's operation was not correctly shown.
V2.11 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (February 2008)
New functions
- Newly supports Modbus RTU.
V2.104 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
Improved functions
- Solved the problem in which the display format could not be reflected in the maximum and minimum values in TENKEY dialog in Test Mode.
Ver.2.103 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (November 2007)
New functions
- Newly supports Mitsubishi Q and QnA series PLCs.
- Newly supports Rockwell(Allen-Bradley) PLC-5,SLC500,MicroLogix,CompactLogix and ControlLogix series PLCs.
Ver.2.10 :Version 2.0*/2.10/2.11 → CX-One Version 2 Auto-update(September 2007)
Improved functions
- Solved the problem that occurred while operating in the Label Tab Page of the Table Object Properties.
Ver.2.10 :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Newly supports the Machine Navigator Function.
- Newly supports the Multifunction Objects.
- Newly supports the higher quality fonts.
- Newly supports the import of DXF file.
- Newly supports the startup of PLC Error Simulator.
Improved functions
- Enhanced the coordination in the integrated simulation and added the zoom function.
- In the symbol sharing with CX-Programmer, additionally supported the string type and the array. It has also become possible to paste even when the address is duplicated.
- Changed the default setting for the shape of buttons and lamps (excluding word lamp) so as to specify the shape ("Select Shape").
- Additionally supported the multi-vendor devices.
- Enhanced the compatibility with NT-series PTs.
- Enhanced the copy/paste function in Edit Properties.
Ver.2.03 :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007)
New functions
Support of New Types
- NS-Runtime is supported.
New model: NS-NSRCL*
- Traditional Chinese is supported.
Ver.2.02 :Version 2.01 → CX-One Version 2.02 (October 2006)
Improved functions
- Solved the problem that when some Smart Active Parts (for NC/MCH units) were pasted and unit numbers were set to other than 0, these Smart Active Parts might not operate properly.
Ver.2.01 :Version 2.01 → CX-One Version 2.0 Auto-update (September 2006)
Improved functions
- Solved the problem with the CX-Designer, in which allocated addresses (such as object addresses) were unintentionally changed when screens were saved under certain conditions before exiting the CX-Designer.
Ver.2.0 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Test Functions
- Supports integrated simulation (in association with the CX-Simulator).
Multi-vendor PLC Support
- Supports connections with EJ1-series Temperature Controllers, some Mitsubishi PLCs, and some Siemens PLCs.
Improvements to Variable-related Functions
- Supports variable programming.
- Names and I/O comments within the symbol table can be reflected in labels and alarm messages.
Security Measures
- Supports read/write protection of screen data.
- Different password protection levels can be set for screen objects.
Supports Multiple Languages
- Supports simplified Chinese, German, Italian, French, and Spanish (CX-Designer menu items and dialogue boxes).
Change history of CX-Thermo
Ver.4.00 :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (December 2007)
New functions
Support of New Types
- THERMAC NEO basic type and advanced type (release on Jan of 2008) are supporte
Supports the new E5CN-H, E5EN-H and E5AN-H
Also, supports the new version models: E5CN, E5EN and E5AN
Enhanced Parameter Editing Function
- Parameters in table format can be edited.
- Each information window can be freely laid out.
Enhanced Compatibility
- Some models can be changed with other models.
Improved functions
- Part number can be entered directly in a device select dialog.
- When TrendViewer is started, PV/SP are automatically selected as parameters to monitor.
- Often used operations are displayed on the toolbar.
Ver.3.21 :Version 2.04 → CX-One Version 2.0 Auto-update (February 2007)
New functions
Support of New Types
- THERMAC EJ1G (Gradient Temperature Control Models) are suppoted.
Compatible with new models: EJ1G-TC2*-QNH, EJ1G-TC4*-QQ, EJ1G-HFU*-NFLK, EJ1G-HFU*-NFL2.
Ver.3.20 :Version 2.03 → CX-One Version 2.0 Auto-update (December 2006)
New functions
Support of New Types
- THERMAC EJ1N(Standard Control Models) Ver.1.1 are supported.
Supports the new: EJ1N-TC2*-CNB
Supports the new version models: EJ1N-TC2*-QNHB, EJ1N-TC4*-QQ,EJ1N-HFU*-NFLK, EJ1N-HFU*-NFL2
Display
- Parameter tree display can be changed by selecting Expanding or Collapsing.
Configuration
- EJ1N Programless Upload/Download settings can be configured in table format.
Trend Viewer
- Parameters such as SP can be changed.
Ver.3.12 :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
Compatibility with New Models
- The THERMAC R Digital Controllers (Programmable) are supported.
Compatible with the new E5AR-T and E5ER-T Controllers.
Trend Viewer
- Operation commands other than RUN/STOP and Autotuning execute/cancel can be sent in the Trend Viewer.
- It is possible to monitor the program output status of E5AR-T and E5ER-T Controllers.
Display
- The icons and menus have been unified to the same style as the other Support Software applications in the CX-One FA Integrated Tool Package.
Change history of CompoNet DTM
- :Version V2.* → CX-One Version 2 Auto-update (August 2009)
Improved functions
- Solved the problem that you can not install certain EDS files.
- :Version V2.* → CX-One Version 2 Auto-update (April 2009)
New functions
[Support of New Types]
- CompoNet Slaves "CRT1" series are supported.
CompoNet Analog I/O Slave with display function
- CompoNet I/Os of C500 series are supported.
- :Version V2.* → CX-One Version 2 Auto-update (December 2008)
New functions
[Support of New Types]
- CompoNet Slaves "CRT1" series is supported.
CompoNet Analog I/O Slave Units with Connectors
- :Version V2.* → CX-One Version 2 Auto-update (October 2008)
New functions
[Support of New Types]
- CompoNet Slaves "CRT1" series is supported.
temperature input terminal (Thermocouple input、Platinum resistance thermometer input)
Improved functions
- Solved the following problem
Over 65535 value can not be used in EDS File Parameter Dialog.
- Support the None Parameter EDS File.
- :Version V2.* → CX-One Version 2 Auto-update (September 2008)
Improved functions
- Solved the problem that the slave (vendor code exceeds 255) cannot be used.
- :Version V2.* → CX-One Version 2 Auto-update (August 2008)
Improved functions
- Add the error message. The message is displayed when the areas are overlapped in Software Setting Table.
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (June 2008)
New functions
Support of New Types
- CompoNet Slaves "SmartSlice GRT1" series is supported.
GRT1-CRT
GRT1-ID4(-1)
GRT1-OD4(-1)
GRT1-ROS2
GRT1-AD2
GRT1-DA2C
GRT1-DA2V
GRT1-TS2P
GRT1-CT1(-1)
Improved functions
- Added the area duplication check function of Software Setting Table in Master Parameter Dialog.
- :Version V2.0*/V2.1* → CX-One Version 2 Auto-update (April 2008)
New functions
Support of New Types
- CompoNet Slaves "CRT1" series is supported.
2-tier terminal series (8IN/OUT、16MIX)
3tier terminal series (8IN/OUT、Disconnected sensor/Short-circuit detection)
Relay output series (8out)
SSR output series (8out)
e-CON series (32IN/OUT/MIX、Disconnected sensor/Short-circuit detection)
Clump series (8IN/OUT、16MIX)
SmartSlice I/O Coupler DTM
- :Version V2.* → CX-One Version 2 Auto-update (June 2009)
Improved functions
- Solved the problem that project files containing previous versions of Slice IO Coupler DTM cannot display the DTM views in CX-ConfiguratorFDT.
Change history of SAP Library
- :Version 2.0*/Version 2.10 → CX-One Version 2.11 Auto-update (August 2007)
New functions
- Troubleshooters for Temperature Control Unit, Motion Control Unit and ID Sensor Unit are supported.
- :Version 2.01 → CX-One Version 2.02 (October 2006)
New functions
- Added the SAP Library for CompoNet.
- :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- Added SAP for the EJ1, G3ZA, troubleshooter (DeviceNet and NC Unit), and CP1H.
Change history of Function Blocks
- :Version 1.12 → CX-One Version 2.0 Upgrade (August 2006)
New functions
- Added convenient FB#1 and function blocks for the EJ1 and CP1H.
- Added convenient FB#2 function block.
Revision History for CX-One Version 2.03 → CX-One Version 2.04 ( February 2007 )
* Information
The version notation was changed along with the release of CD/DVD that contained the content of the change until CX-One Version 2.0 Auto-update(December 2006).
(The customers who have already updated to CX-One Version 2.0 Auto-update(December 2006) need not arrange this update.)