Creating a dashboard for the Condition Monitoring Package to monitor with K7DD

Launch the Dashboard Generator and create a dashboard for the Condition Monitoring Package to monitor the equipment status with a K7DD (advanced motor condition monitoring device).

NEWScanning devices in the Dashboard Generator

Create a dashboard for the Condition Monitoring Package (Variable Speed Motor).
This procedure assumes that the Dashboard Generator, SpeeDBee Synapse, and Chart Display Tool have already been linked.
In the Device List Screen of the Dashboard Generator, click the [Device Scan] button on the upper right.
Click the [Scan] button. Confirm the scanned devices and click the [Apply] button. Confirm that the devices have been updated in the Device List Screen.
(In the example, “192.168.250.22” is added to the Ethernet section as the IP address of a communication converter.)

NEWRegistering an additional communication converter and K7DD

Click the [Edit] button associated with the communication converter added to the Ethernet section through the device scan.
From the device type dropdown menu, select [ModbusTCP/ModbusRTU]. Enter a desired name in the device name field. (In the example, “com converter” is entered.)
Click the [Save] button, and confirm that the IP address of the communication converter is displayed in the ModbusTCP/ModbusRTU section.
Click the [Add Modbus RTU Device] button. From the IP address dropdown menu, select the IP address of the communication converter you added.
Enter the communication unit number of K7DD in the slave ID field. Enter a desired name in the device name field. (In the example, “K7DD” is entered.) Click the [Save] button.

NEWRegistering a dashboard in the Dashboard Generator

In the Package List Screen, click the [Register Dashboard] button on the upper right.
Enter a dashboard name, select a package, and enter the equipment identification information as necessary.
After selecting a package, click the [Select Devices / Set Parameters] button when it becomes active.
Select a device from the IP address and slave ID dropdown menu and click the [Apply] button.
In the Register Dashboard Screen, click the [Register] button on the lower right.
Wait approximately 30 seconds then navigate to the Dashboard List Screen to confirm that the registration is completed.

NEWLaunching SpeeDBee Synapse

In the Dashboard List Screen, click the [SpeeDBee Synapse] button on the upper right.
Confirm that a panel with the desired dashboard name has been added. (In the example, it is named “TEST”.)
Click the [DETAIL] button in the panel.
Click the [Start] button. Confirm that the flow links turn green and the component starts.
Click the [System] tab.
Click the ▶ button of the error manager to start it.

NEWLaunching Chart Display Tool

In the SpeeDBee Synapse Screen, click the graph icon on the upper right to start the Chart Display Tool.
Click [Dashboards].
Select the desired dashboard name that has been added. (In the example, it is named “TEST”.)
Select the package being used. (In the example, the Condition Monitoring Package (Variable Speed Motor) is being used.)
Confirm that the KPI is displayed in the graph.
To change the horizontal axis (time range) of the graph, use the [Last 1hours JST] dropdown menu.
To change the data refresh frequency, use the [Refresh] dropdown menu on the upper right.

Manual PDF

Python™ is a trademark or registered trademark of the Python Software Foundation.
SpeeDBee Synapse is a trademark of SALTYSTER Co., Ltd.