- Python™ is a trademark or registered trademark of the Python Software Foundation.
- SpeeDBee Synapse is a trademark of SALTYSTER Co., Ltd.
Creating a dashboard for the Condition Monitoring Package to monitor with K6CM/K6PM
Launch the Dashboard Generator and create a dashboard for the Condition Monitoring Package to monitor the equipment status with a K6CM (induction motor condition monitoring device) or K6PM (thermal condition monitoring device).
NEWScanning devices in the Dashboard Generator
Create a dashboard for a condition monitoring package other than the Condition Monitoring Package (Variable Speed Motor). This procedure assumes that the Dashboard Generator, SpeeDBee Synapse, and Chart Display Tool have already been linked.
In the Device List Screen of the Dashboard Generator, click the [Device Scan] button on the upper right.
Click the [Scan] button. Confirm the scanned devices and click the [Apply] button. Confirm that the devices have been updated in the Device List Screen. (In the example, “K6CM-VBMx-EIP” is added to the EtheNet/IP section.)
NEWRegistering a dashboard in the Dashboard Generator
In the Package List Screen, click the [Register Dashboard] button on the upper right.
Enter a dashboard name, select a package, and enter the equipment identification information as necessary.
After selecting a package, click the [Select Devices / Set Parameters] button when it becomes active.
Select a device from the IP address dropdown menu and click the [Apply] button.
In the Register Dashboard Screen, click the [Register] button on the lower right.
Wait approximately 30 seconds then navigate to the Dashboard List Screen to confirm that the registration is completed.
NEWLaunching SpeeDBee Synapse
In the Dashboard List Screen, click the [SpeeDBee Synapse] button on the upper right.
Confirm that a panel with the desired dashboard name has been added.
(In the example, it is named “TEST”.)
Click the [DETAIL] button in the panel.
Click the [Start] button. Confirm that the flow links turn green and the component starts.
Click the [System] tab.
Click the ▶ button of the error manager to start it.
NEWLaunching Chart Display Tool
In the SpeeDBee Synapse Screen, click the graph icon on the upper right to launch the Chart Display Tool.
Click [Dashboards].
Select the desired dashboard name that has been added. (In the example, it is named “TEST”.)
Select the package being used.
(In the example, the Condition Monitoring Package (Induction Motor, Vibration Type) is being used.)
Confirm that the KPI is displayed in the graph.
To change the horizontal axis (time range) of the graph, use the [Last 1hours JST] dropdown menu.
To change the data refresh frequency, use the Refresh dropdown menu on the upper right.