- Python™ is a trademark or registered trademark of the Python Software Foundation.
- SpeeDBee Synapse is a trademark of SALTYSTER Co., Ltd.
Saving data
Make settings for saving data.
NEWChanging the data save destination
Change the data save destination for the data flow controller from the internal memory to the USB memory.
This procedure assumes that the dashboard for the Event-triggered Video Logging Package has been created, and SpeeDBee Synapse and the Chart Display Tool have launched successfully.
In the SpeeDBee Synapse Screen, click the [STOP] button on the upper right, then insert the USB memory to the USB port of the data flow controller.
In the Web UI Screen, switch [operating] to [setup] on the upper right.
Click the USB Port of the utility, set the port status to [Enable].
After the data flow controller is restarted, confirm that the status of the USB port is [Enable].
In the SpeeDBee Synapse screen, confirm that the data refresh is started again.
NEWSetting a period of data to be displayed in a dashboard
In the Chart Display Tool, set the data range to display and calculate data.
This procedure assumes that the dashboard for the Event-triggered Video Logging Package has been registered, and SpeeDBee Synapse and the Chart Display Tool have launched successfully.
In the SpeeDBee Synapse Screen, switch [Run] to [Edit] on the upper right.
Click the [Stop] button.
Select [Server Settings] and then set the data retention period.
Right-click the output port of the component.
Check [Storage] and set the storage type to “GroupA”.
Click the [Start] button.